1.4 — Variable assignment and initialization

In the previous lesson (1.3 -- Introduction to objects and variables), we covered how to define a variable that we can use to store values. In this lesson, we’ll explore how to actually put values into variables and use those values.

As a reminder, here’s a short snippet that first allocates a single integer variable named x, then allocates two more integer variables named y and z:

int x;    // define an integer variable named x
int y, z; // define two integer variables, named y and z

Variable assignment

After a variable has been defined, you can give it a value (in a separate statement) using the = operator. This process is called assignment, and the = operator is called the assignment operator.

int width; // define an integer variable named width
width = 5; // assignment of value 5 into variable width

// variable width now has value 5

By default, assignment copies the value on the right-hand side of the = operator to the variable on the left-hand side of the operator. This is called copy assignment.

Here’s an example where we use assignment twice:

#include <iostream>

int main()
{
	int width;
	width = 5; // copy assignment of value 5 into variable width

	std::cout << width; // prints 5

	width = 7; // change value stored in variable width to 7

	std::cout << width; // prints 7

	return 0;
}

This prints:

57

When we assign value 7 to variable width, the value 5 that was there previously is overwritten. Normal variables can only hold one value at a time.

Initialization

One downside of assignment is that it requires at least two statements: one to define the variable, and one to assign the value.

These two steps can be combined. When a variable is defined, you can also provide an initial value for the variable at the same time. This is called initialization. The value used to initialize a variable is called an initializer.

Initialization in C++ is surprisingly complex, so we’ll present a simplified view here.

There are 6 basic ways to initialize variables in C++:

int a;         // no initializer (default initialization)
int b = 5;     // initializer after equals sign (copy initialization)
int c( 6 );    // initializer in parenthesis (direct initialization)

// List initialization methods (C++11) (preferred)
int d { 7 };   // initializer in braces (direct list initialization)
int e = { 8 }; // initializer in braces after equals sign (copy list initialization)
int f {};      // initializer is empty braces (value initialization)

You may see the above forms written with different spacing (e.g. int d{7};). Whether you use extra spaces for readability or not is a matter of personal preference.

Default initialization

When no initialization value is provided (such as for variable a above), this is called default initialization. In most cases, default initialization leaves a variable with an indeterminate value.

We’ll discuss this case further in lesson (1.6 -- Uninitialized variables and undefined behavior).

Copy initialization

When an initializer is provided after an equals sign, this is called copy initialization. This form of initialization was inherited from C.

int width = 5; // copy initialization of value 5 into variable width

Much like copy assignment, this copies the value on the right-hand side of the equals into the variable being created on the left-hand side. In the above snippet, variable width will be initialized with value 5.

Copy initialization had fallen out of favor in modern C++ due to being less efficient than other forms of initialization for some complex types. However, C++17 remedied the bulk of these issues, and copy initialization is now finding new advocates. You will also find it used in older code (especially code ported from C), or by developers who simply think it looks more natural and is easier to read.

Direct initialization

When an initializer is provided inside parenthesis, this is called direct initialization.

int width( 5 ); // direct initialization of value 5 into variable width

Direct initialization was initially introduced to allow for more efficient initialization of complex objects (those with class types, which we’ll cover in a future chapter). Just like copy initialization, direct initialization had fallen out of favor in modern C++, largely due to being superseded by list initialization. However, we now know that list initialization has a few quirks of its own, and so direct initialization is once again finding use in certain cases.

int x();  // forward declaration of function x
int x(0); // definition of variable x with initializer 0

List initialization

The modern way to initialize objects in C++ is to use a form of initialization that makes use of curly braces. This is called list initialization (or uniform initialization or brace initialization).

List initialization comes in three forms:

int width { 5 };    // direct list initialization of value 5 into variable width
int height = { 6 }; // copy list initialization of value 6 into variable height
int depth {};       // value initialization (see next section)

List initialization has an added benefit: it disallows “narrowing conversions”. This means that if you try to brace initialize a variable using a value that the variable can not safely hold, the compiler will produce an error. For example:

int width { 4.5 }; // error: a number with a fractional value can't fit into an int

In the above snippet, we’re trying to assign a number (4.5) that has a fractional part (the .5 part) to an integer variable (which can only hold numbers without fractional parts).

Copy and direct initialization would simply drop the fractional part, resulting in the initialization of value 4 into variable width (your compiler may produce a warning about this, since losing data is rarely desired). However, with list initialization, the compiler will generate an error instead, forcing you to remedy this issue before proceeding.

Conversions that can be done without potential data loss are allowed.

To summarize, list initialization is generally preferred over the other initialization forms because it works in most cases, it disallows narrowing conversions, and it supports initialization with lists of values (something we’ll cover in a future lesson). While you are learning, we recommend sticking with list initialization (or value initialization).

Value initialization and zero initialization

When a variable is list initialized using empty braces, value initialization takes place. In most cases, value initialization will initialize the variable to zero (or empty, if that’s more appropriate for a given type). In such cases where zeroing occurs, this is called zero initialization.

int width {}; // value initialization / zero initialization to value 0

int x { 0 };    // explicit initialization to value 0
std::cout << x; // we're using that zero value

int x {};      // value initialization
std::cin >> x; // we're immediately replacing that value

Initialize your variables

Initialize your variables upon creation. You may eventually find cases where you want to ignore this advice for a specific reason (e.g. a performance critical section of code that uses a lot of variables), and that’s okay, as long the choice is made deliberately.

We explore what happens if you try to use a variable that doesn’t have a well-defined value in lesson 1.6 -- Uninitialized variables and undefined behavior.

Initializing multiple variables

In the last section, we noted that it is possible to define multiple variables of the same type in a single statement by separating the names with a comma:

int a, b;

We also noted that best practice is to avoid this syntax altogether. However, since you may encounter other code that uses this style, it’s still useful to talk a little bit more about it, if for no other reason than to reinforce some of the reasons you should be avoiding it.

You can initialize multiple variables defined on the same line:

int a = 5, b = 6;          // copy initialization
int c( 7 ), d( 8 );        // direct initialization
int e { 9 }, f { 10 };     // direct brace initialization
int g = { 9 }, h = { 10 }; // copy brace initialization
int i {}, j {};            // value initialization

Unfortunately, there’s a common pitfall here that can occur when the programmer mistakenly tries to initialize both variables by using one initialization statement:

int a, b = 5; // wrong (a is not initialized!)

int a = 5, b = 5; // correct

In the top statement, variable “a” will be left uninitialized, and the compiler may or may not complain. If it doesn’t, this is a great way to have your program intermittently crash or produce sporadic results. We’ll talk more about what happens if you use uninitialized variables shortly.

The best way to remember that this is wrong is to consider the case of direct initialization or brace initialization:

int a, b( 5 );
int c, d{ 5 };

Because the parenthesis or braces are typically placed right next to the variable name, this makes it seem a little more clear that the value 5 is only being used to initialize variable b and d, not a or c.

Unused initialized variables warnings

Modern compilers will typically generate warnings if a variable is initialized but not used (since this is rarely desirable). And if “treat warnings as errors” is enabled, these warnings will be promoted to errors and cause the compilation to fail.

Consider the following innocent looking program:

int main()
{
    int x { 5 }; // variable defined

    // but not used anywhere

    return 0;
}

When compiling this with the g++ compiler, the following error is generated:

prog.cc: In function 'int main()':
prog.cc:3:9: error: unused variable 'x' [-Werror=unused-variable]

and the program fails to compile.

There are a few easy ways to fix this.

1. If the variable really is unused, then the easiest option is to remove the defintion of x (or comment it out). After all, if it’s not used, then removing it won’t affect anything.
2. Another option is to simply use the variable somewhere:

#include <iostream>

int main()
{
    int x { 5 };

    std::cout << x; // variable now used somewhere

    return 0;
}

But this requires some effort to write code that uses it, and has the downside of potentially changing your program’s behavior.

The [[maybe_unused]] attribute C++17

In some cases, neither of the above options are desirable. Consider the case where we have a bunch of math/physics values that we use in many different programs:

int main()
{
    double pi { 3.14159 };
    double gravity { 9.8 };
    double phi { 1.61803 };

    // assume some of the above are used here, some are not

    return 0;
}

If we use these a lot, we probably have these saved somewhere and copy/paste/import them all together.

However, in any program where we don’t use all of these values, the compiler will complain about each variable that isn’t actually used. While we could go through and remove/comment out the unused ones for each program, this takes time and energy. And later if we need one that we’ve previously removed, we’ll have to go back and re-add it.

To address such cases, C++17 introduced the [[maybe_unused]] attribute, which allows us to tell the compiler that we’re okay with a variable being unused. The compiler will not generate unused variable warnings for such variables.

The following program should generate no warnings/errors:

int main()
{
    [[maybe_unused]] double pi { 3.14159 };
    [[maybe_unused]] double gravity { 9.8 };
    [[maybe_unused]] double phi { 1.61803 };

    // the above variables will not generate unused variable warnings

    return 0;
}

Additionally, the compiler will likely optimize these variables out of the program, so they have no performance impact.

Quiz time

Question #1

What is the difference between initialization and assignment?

Show Solution

Question #2

What form of initialization should you prefer when you want to initialize a variable with a specific value?

Show Solution

Question #3

What are default initialization and value initialization? What is the behavior of each? Which should you prefer?

Show Solution